But when I plug in my projector, which has no sound input, the computer stops outputting to HDMI at all in my case, and ouputs through the built-in computer speakers. I wanted (like the original poster, I think) to send HDMI out from a computer to a home theater system with a passthrough to my projector. This solution won't work, unless I'm misunderstanding. If it does not, please follow the instructions below that pertain your laptop's operating system.Here is a belated response to DCA - gasman. After your desktop has loaded, your laptop image should project. In DCS rooms where the VGA and HDMI cables are not attached to the system, you will need to connect the other end of this cable to the system jack. If you are using a HDMI or VGA adapter, plug the adapter into your laptop and connect the provided cable to the other end of the adapter. Connect the VGA or HDMI cable to your laptop's VGA or HDMI port.Turn on the system and select the appropriate button for laptop.If your laptop does not have a VGA or HDMI port, you will need to purchase an adapter that allows you to connect one of these two cables to your laptop. Newer laptops may not have a VGA or HDMI port. To see if your room also has a VGA input, click on "Classroom Features" and check "Additional Items." To see if your classroom has a data projector, search for the room and click on the "Technology" tab. The VGA port on a laptop consists of three rows of five holes. Some older systems may also have a VGA cable that may be used to connect a laptop to the projector. Videoconference, Streaming, & Recording SupportĪll classrooms equipped with the Digital Classroom Systems have HDMI inputs that may also be used to project from laptops.Teaching in an Immersive Synchronous Lecture Hall.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |